Flap_control.fmu

FMU archive generated using Elements FMU Connector

Description

The Flap_control model runs in the continuous domain and is created in the Elements modeling environment. The Flap_control.fmu archive is created using Elements FMU Connector.

The Flap_control.fmu is a system with:

System Variables

The following variables are used in the generated C code:

y[ 0] = `Main.Flap_control.F`(t)

dx:

  y[ 0] = `Main.Flap_control.dx`(t)

x:

  y[ 1] = `Main.Flap_control.x`(t)

x[ 0] = `Main.Flap_control.PID4.D.x[1]`(t)

x[ 1] = `Main.Flap_control.PID4.I.y`(t)

p[ 0] = `Main.GAI` (default = .12e5)

p[ 1] = `Main.GAP` (default = .15e5)

p[ 2] = `Main.TMM` (default = .8e3)

p[ 3] = `Main.c` (default = .18e4)

p[ 4] = `Main.Flap_control.A1.k1` (default = 1.)

p[ 5] = `Main.Flap_control.A1.k2` (default = 1.)

p[ 6] = `Main.Flap_control.G3.k` (default = 1.)

p[ 7] = `Main.Flap_control.G4.k` (default = 1.)

p[ 8] = `Main.Flap_control.PID4.Add.k1` (default = 1.)

p[ 9] = `Main.Flap_control.PID4.Add.k2` (default = 1.)

p[10] = `Main.Flap_control.PID4.Add.k3` (default = 1.)

p[11] = `Main.Flap_control.PID4.Nd` (default = .1e4)

p[12] = `Main.Flap_control.PID4.Td` (default = .1)

p[13] = `Main.Flap_control.PID4.k` (default = 1.)

p[14] = `Main.Flap_control.R1.duration` (default = 5.)

p[15] = `Main.Flap_control.R1.height` (default = .3)

p[16] = `Main.Flap_control.R1.offset` (default = 0.)

p[17] = `Main.Flap_control.R2.duration` (default = 5.)

p[18] = `Main.Flap_control.R2.height` (default = -.3)

p[19] = `Main.Flap_control.R2.offset` (default = 0.)

p[20] = `Main.Flap_control.S1.height` (default = .25e3)

p[21] = `Main.Flap_control.S1.offset` (default = 0.)

p[22] = `Main.Flap_control.S2.height` (default = .35)

p[23] = `Main.Flap_control.S2.offset` (default = 0.)

Elements / FMI Connector Details